24 Other Methods of Control

In this section:

Sterilisation protocols require procedures that are not practical or necessary, in many settings. Various other methods are used in clinical and nonclinical settings to reduce the microbial load on items. Although the terms for these methods are often used interchangeably, there are important distinctions.

Disinfection

The process of disinfection inactivates most microbes on the surface of a fomite by using antimicrobial chemicals or heat. Because some microbes remain, the disinfected item is not considered sterile. Ideally, disinfectants should be fast acting, stable, easy to prepare, inexpensive and easy to use. An example of a natural disinfectant is vinegar; its acidity kills most microbes. Chemical disinfectants, such as chlorine bleach or products containing chlorine, are used to clean nonliving surfaces such as laboratory benches, clinical surfaces and bathroom sinks. Typical disinfection does not lead to sterilisation because endospores tend to survive even when all vegetative cells have been killed.

Antiseptics

Unlike disinfectants, antiseptics are antimicrobial chemicals safe for use on living skin or tissues. Examples of antiseptics include hydrogen peroxide and isopropyl alcohol. The process of applying an antiseptic is called antisepsis. In addition to the characteristics of a good disinfectant, antiseptics must also be selectively effective against microorganisms and able to penetrate tissue deeply without causing tissue damage.

Level of Cleanliness

The type of protocol required to achieve the desired level of cleanliness depends on the particular item to be cleaned. For example, those used clinically are categorised as critical, semi critical and noncritical. Critical items must be sterile because they will be used inside the body, often penetrating sterile tissues or the bloodstream; examples of critical items include surgical instruments, catheters and intravenous fluids. Gastrointestinal endoscopes and various types of equipment for respiratory therapies are examples of semi critical items; they may contact mucous membranes or nonintact skin but do not penetrate tissues. Semi critical items do not typically need to be sterilised but do require a high level of disinfection. Items that may contact but not penetrate intact skin are noncritical items; examples are bed linens, furniture, crutches, stethoscopes and blood pressure cuffs. These articles need to be clean but not highly disinfected.

Handwashing

The act of handwashing is an example of degerming, in which microbial numbers are significantly reduced by gently scrubbing living tissue, most commonly skin, with a mild chemical (eg soap) to avoid the transmission of pathogenic microbes. Wiping the skin with an alcohol swab at an injection site is another example of 'degerming'. These methods remove most (but not all) microbes from the skin’s surface.

Sanitisation

The term sanitisation refers to the cleansing of fomites to remove enough microbes to achieve levels deemed safe for public health. For example, commercial dishwashers used in the food service industry typically use very hot water and air for washing and drying; the high temperatures kill most microbes, sanitising the dishes. Surfaces in hospital rooms are commonly sanitised using a chemical disinfectant to prevent disease transmission between patients. Common protocols, definitions, applications and agents used to control microbial growth are summarised in Table 7.2.

Table 7.2a Common protocols for control of microbial growth for use on fomites

Protocol to control microbial growth on fomites. Definition Common Application Common Agents
Disinfection Reduces or destroys microbial load of an inanimate item through application of heat or antimicrobial chemicals Cleaning surfaces like laboratory benches, clinical surfaces, and bathrooms Chlorine bleach, phenols (eg Lysol), glutaraldehyde
Sanitisation Reduces microbial load of an inanimate item to safe public health levels through application of heat or antimicrobial chemicals Commercial dishwashing of eating utensils, cleaning public restrooms Detergents containing phosphates (.g Finish), industrial-strength cleaners containing quaternary ammonium compounds
Sterilisation Completely eliminates all vegetative cells, endospores, and viruses from an inanimate item Preparation of surgical equipment and of needles used for infection Pressurised steam (autoclave), chemicals, radiation

Table 7.2b Common protocols for control of microbial growth for use on living tissue.

Protocol to control microbial growth on living tissue Definition Common Application Common Agents
Antisepsis Reduces microbial load on skin or tissue through application of an antimicrobial chemical Cleaning skin broken due to injury; cleaning skin before surgery Boric acid, isopropyl alcohol, hydrogen peroxide, iodine (betadine)
Microbial reduction ('degerming') Reduces microbial load on skin or tissue through gentle to firm scrubbing and the use of mild chemicals Handwashing Soap, alcohol swab
definition

License

Icon for the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License

Book 2: Biosciences for Health Professionals Copyright © 2026 by University of Southern Queensland is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License, except where otherwise noted.